SIMPLE TOOLS AND WAYS TO DRIVE THE MOTORCYCLE FOAM

Terlatih.me In the world of automotive, especially motorbikes, there are a lot of methods or ways of modifying or designing motorbike parts. Especially for motorbike owners who have a hobby and like to make motorbikes to make them look hip, fashionable and cool. For most motorcycle owners who like to modify or have a hobby of making motorbikes, in general, the dominance of young people or young people who care for that age really feels that they want to look different from others. For one type of modification that is usually used in the brain to work on the part of a motorcycle that has always been done from ancient times until now, it is still being done or still enjoying, one of which is by modifying the seat of the motorcycle by pressing or thinning the foam to as thin as possible. indeed this is common or certain to be done by young people in Indonesia. As for the method or step in applying or thinning the seat foam on a motorcycle, the following tools are used, including:

 Regarding the process or stages and steps, the tools that are used and used are very simple and easy. With this convenience that is the reason or the reason for many teenagers in Indonesia to do this, yes, even though the presence of pressing or thinning the seat foam on a motorcycle greatly affects and looks real, it will result in reducing the level of comfort when driving as it feels hard or not soft and tends to hurt the buttocks as well as other effects. even though all the shortcomings when driving on a motorbike that is smeared or thinned like the foam of the seat, but in terms of appearance it looks good and cool. In the process of applying or thinning the foam of a motorcycle seat in terms of tools, it is very simple and usually uses or uses as follows:

In the process of thinning or pressing the foam parts of the motorcycle seats using tools, including:

 A. Hacksaw.

 B. Tool for fading coconut or parud

 C. Tang.

 D. Cutter.

 E. Key no 10.

 F. Screwdriver min. Then the steps or processes in thinning motorcycle seat foam are:

 A. Opening the seat using the key no 10.

 B. Remove the seat skin using a screwdriver and pliers to remove the staple part that is attached to the seat.

 C. Thin or press the foam upholstery using a hacksaw. If the seat skin can be opened then do the process of thinning the foam by sawing it using a hacksaw in sequence from the front to the top then massage backward while pulling up the seat foam that has been sawed slowly and be careful so that the results are obtained for a flat foam surface.

 D. Smooth the part of the foam that has been thinned or in papers, with a coconut and coconut tool. After finishing thinning or drying the upholstery foam to make it look smoother, then using coconut and coconut tools is very effective and fits perfectly in smoothing it.

 E. Replacing the leather seats and those that had been opened. The final step is to replace the leather seats or seat covers using staples. And also install the seat on the motorcycle using the key no.10. 

That is what we can inform you on this occasion, hopefully it can be useful and useful. That is all and thank you.

klik https://ilmucoro.blogspot.com/