install leather seats and tools used on motorbikes
Terlatih.me On motorbikes, the seat or seat skin is one of the parts that are easy or easy to experience injuries such as tears, holes and cracks due to punctures and sharp scratches and also due to frequent direct exposure to sunlight when parking. the motorbike. And on the part of the seat skin on a motorcycle that has been torn or perforated, even if only a little, but if it is allowed to dissolve, it will generally continue to expand by itself so that it is not realized that it will widen or get worse and will even cause damage to the foam parts. Therefore, if you have experienced a tear in the leather of the seat on the motorcycle so that it does not injure or penetrate the foam, it would be nice to immediately replace the damaged part of the seat skin. And to be able to replace the leather upholstery on a motorcycle, the following tools and materials and methods include:
On motorbikes where the leather of the seat has been torn or perforated even though it is still a little bit and has not widened, it is better to replace it immediately, so as not to experience it, namely penetrating the foam of the seat on the motorbike. And to be able to replace it is actually very easy and not too difficult, of course you can do it yourself, the most important thing is that we can prepare all the materials and tools that are used or used, as for the tools that are used or used if we are trying to find also simple easy to get. And to find out the tools used in the process of replacing the skin of a motorcycle seat, including the following:
When going to replace the leather of a motorcycle seat for the tools and materials used, namely:
A. Key no 10.
B. Scissors or cutter.
C. Medium steps and the contents of the staple.
D. Screwdriver min.
E. Tang.
F. Leather seats.
And for the process of replacing motorcycle seat skins, including:
A. Open the seat on the motorbike from the nut or baud using the key number 10.
B. Remove, pull out the contents of the staple attached to the seat using a screwdriver and pliers.
C. Replacing or installing a new leather upholstery using staples and contents. The trick is if the seat part has opened or removed the old seat skin, then for an easier installation process, namely starting from the front of the inside, then switching to the back, after that the middle part both right and left side and continue to the front again, next back. Do the installation in sequence and while pulling firmly on the part of the seat skin so that it can be flexible and easy.
D. Cut the unused seat skin when the installation process is successful and as desired by using scissors.
This is what we can inform you at this meeting, hopefully it can be useful and useful in adding to your knowledge. That is all and thank you.
Post a Comment for " install leather seats and tools used on motorbikes"