REMOVER EASES ONTEL BIKE REPAIR PROCESS
Terlatih.me For people or owners of an on the bicycle who are hobbyists and like to collect and repair or make good in terms of appearance on a used one bicycle. As we all know, used the bikes generally have weaknesses or shortcomings in terms of appearance, so that with these conditions, used the bikes usually make the price cheaper. Therefore, with the price of used one bikes more and more, the ontel lovers who choose to find or buy on the used other bikes then make improvements in terms of appearance by replacing the old paint by replacing with new paint. And for the old and new paint repair process to make it easier and faster, a remover is used. As for the process of using repair parts for bicycle paint, the following is how:
Indeed, a remover with a hard inner content is very useful and very useful in simplifying, accelerating, and saving time in the repair process or peeling off the paint that sticks to iron parts for parts such as bars, handlebar, and wheels on a beka one bicycle, which is often found. in a condition that the paint is already dull or peeling, that's why if you are going to make repairs to the paint by peeling it first by using a remover with all its contents it can be easier and faster. However, when using or using a remover, you should be more careful and avoid the remover not to get on our skin, this is because the remover is a harsh medicine and when it hits the skin you will experience skin irritation such as itching and other skin irritations. , besides that, when you open the cover where the remover usually occurs, an eruption will occur, so it is advisable to wear a mask with the aim of protecting our faces from the spurt of water remover. As for the safety steps in the repair process by using or using a remover, the following information is from us, namely:
During the repair process on the paint part for used ontel bicycles using a remover, the following is the safe way to prepare the tools and materials, namely:
A. Remover.
B. Brush.
C. Tease the wire.
D. Masks.
E. Gloves.
F. Sandpaper.
G. Water.
H. Cain.
After all the tools are met, enter the paint repair process using a remover as follows:
A. Put on a mask before opening the cover where the remover is after you use the mask and then open it.
B. Apply to all parts that will be repaired by using a brush, also don't forget to wear gloves to be safe.
C. After applying all parts of the remover with a brush, wait for the paint to peel off by itself.
D. If the paint has peeled off, refine it or make it more evenly reaching all parts using a wire rack until it is clean.
E. With all the paint is clean, then wash it with water and a cloth until all the old paint is gone, then wait for it to dry by heating it in the sun.
F. For the next process of curing with new paint according to the desired taste.
That is the information we can provide for our encounter this time. Hopefully, it can be useful and useful to all. That is all and thank you
